White Marble Catholic Statues Holy Family YRMR-018

Marble Carving Sculpture – Technique Process
1. Design & Planning

Based on religious themes or client requests, artists create sketches and drawings to define the pose, size, and details of the statue.

2. Selecting the Marble Block

High‑quality natural marble is chosen for its color, texture, and durability, ensuring it is suitable for indoor churches or outdoor use.

3. Rough Shaping

The marble block is cut to size and roughly shaped. Artisans remove excess stone with chisels and machines to form the basic outline.

4. Fine Carving

Using finer tools, sculptors carve facial expressions, hands, drapery, and religious symbols. This is the most skill‑intensive stage.

5. Smoothing & Polishing

The surface is smoothed with abrasives and polished to reveal the natural luster of the marble and a refined finish.

6. Quality Check & Protection

Each statue is carefully inspected. If needed, small corrections are made, and a protective treatment can be applied, especially for outdoor sculptures.

Bronze Sculpture – Technique Process
1. Design & Clay Model

The process begins with drawings and then a clay or wax model of the statue. This model shows all the details and is approved before casting.

2. Mold Making

From the clay model, a mold (usually silicone and plaster or fiberglass) is created. This mold captures all the fine details of the original model.

3. Wax Casting

Molten wax is poured into the mold to create a hollow wax replica of the sculpture. Artists refine the wax surface and add or adjust details.

4. Ceramic Shell (Lost‑Wax Process)

The wax sculpture is coated repeatedly with ceramic slurry and sand to build a hard shell. After drying, the wax is melted and drained out, leaving a hollow ceramic mold.

5. Bronze Pouring

Molten bronze is poured into the ceramic shell. Once the metal cools, the ceramic shell is broken away, revealing the raw bronze sculpture.

6. Welding & Chasing

If the sculpture is cast in several pieces, they are welded together. Artisans then grind, refine, and sharpen the details (a process called chasing).

7. Patina & Surface Treatment

Chemical patinas and heat are used to achieve the desired bronze color and tone. A protective wax or clear coating is applied to improve durability, especially outdoors.

8. Final Inspection

The finished bronze sculpture is inspected, cleaned, and prepared for packing and shipping to the client.