Bronze Church Bell with Cross and Doves

Custom cast bronze church bell with hand-carved cross relief and two doves, polished silver-bronze finish. Made to order for parishes, cathedrals and mission churches.
Item No: YRBR-008
Size: Custom Sizes
Material: High Quality Bronze
Price: $3,190-$6,590
Technique: Traditional lost wax method, High polish, Patina, Exquisite clay model

Advantage:  Factory Direct, Door to Door Delivery

Service:  Custom Design Avaiable.

Attention:  To protect our copyright, there are so many designs that we can not display on this website. Welcome to contact us for full catalogs.

Share:

Description

This bell is cast around two living signs: the cross at its center, and two doves standing at its foot. They are not added ornament — together they tell what a church bell is for.

The cross

The cross is not decoration on a church bell; it is the reason the bell exists at all.

From the earliest days of Christianity, bells were rung to call the faithful to prayer, to mark the hours of the divine office, and to announce the gospel across the village.

When a bell is cast, the cross is raised on its surface so that the voice of the bell and the sign of redemption travel out together into the world. On this bell, the cross takes the form of a quatrefoil — its arms ending in four-lobed curves, with a twelve-petal rosette blooming where they meet. That shape echoes the Eastern-rite and Syriac tradition of the cross as the tree of life, planted at the center of the garden; the twelve petals recall the twelve apostles, so that the whole relief reads as a small summary of the faith.

The dove

The dove carries two voices from Scripture at once.

The first comes from the flood: Noah sent out a dove, and it returned with an olive leaf — the first living thing to come back to the ark, the first sign that the old world had ended and a covenant was beginning.

The second comes from the banks of the Jordan: when Christ was baptized, the Holy Spirit descended on him in the form of a dove.

On this bell the two doves stand at the foot of the cross, turned slightly inward, perched on a stepped plinth — not flying upward, but resting. That posture is deliberate. The Christian life is not only about rising; it is about sitting quietly beneath the cross and listening.

Lost-Wax Casting

We cast every bell by the lost-wax process, working the cross and dove reliefs by hand into the clay model before pouring — so the quatrefoil lobes, the rosette and the doves’ feathers come out sharp and clean, with no lost detail.

Each bell is cast as a single solid piece — no welded seams, no assembled sections. This one-piece construction is what gives the bell its deep, mellow, sustained tone; the bronze resonates as one continuous shell, so the sound carries clear and long.

What’s more, the finish is optional. Besides this polished gilded silver-bronze shown here, we can finish the bell in a range of patinas — dark antique brown, weathered verdigris, or matte blackened bronze. We also recommend brass as an alternative material: brass is lighter in color, warmer in tone, and takes a bright polished finish beautifully.

Where It Sings

This church bell is built for tower installation. It suits a parish church, mission, school chapel or monastery. We also make smaller wall-mounted versions for shrines and grottos.

Order this custom bronze church bell with cross and doves — we will cast it to your size, inscription and finish, and send you a sound recording before it ships.

Marble Carving Sculpture – Technique Process
1. Design & Planning

Based on religious themes or client requests, artists create sketches and drawings to define the pose, size, and details of the statue.

2. Selecting the Marble Block

High‑quality natural marble is chosen for its color, texture, and durability, ensuring it is suitable for indoor churches or outdoor use.

3. Rough Shaping

The marble block is cut to size and roughly shaped. Artisans remove excess stone with chisels and machines to form the basic outline.

4. Fine Carving

Using finer tools, sculptors carve facial expressions, hands, drapery, and religious symbols. This is the most skill‑intensive stage.

5. Smoothing & Polishing

The surface is smoothed with abrasives and polished to reveal the natural luster of the marble and a refined finish.

6. Quality Check & Protection

Each statue is carefully inspected. If needed, small corrections are made, and a protective treatment can be applied, especially for outdoor sculptures.

Bronze Sculpture – Technique Process
1. Design & Clay Model

The process begins with drawings and then a clay or wax model of the statue. This model shows all the details and is approved before casting.

2. Mold Making

From the clay model, a mold (usually silicone and plaster or fiberglass) is created. This mold captures all the fine details of the original model.

3. Wax Casting

Molten wax is poured into the mold to create a hollow wax replica of the sculpture. Artists refine the wax surface and add or adjust details.

4. Ceramic Shell (Lost‑Wax Process)

The wax sculpture is coated repeatedly with ceramic slurry and sand to build a hard shell. After drying, the wax is melted and drained out, leaving a hollow ceramic mold.

5. Bronze Pouring

Molten bronze is poured into the ceramic shell. Once the metal cools, the ceramic shell is broken away, revealing the raw bronze sculpture.

6. Welding & Chasing

If the sculpture is cast in several pieces, they are welded together. Artisans then grind, refine, and sharpen the details (a process called chasing).

7. Patina & Surface Treatment

Chemical patinas and heat are used to achieve the desired bronze color and tone. A protective wax or clear coating is applied to improve durability, especially outdoors.

8. Final Inspection

The finished bronze sculpture is inspected, cleaned, and prepared for packing and shipping to the client.

Packaging

>> The packaging is all made of a strong wood crate plus soft fixed.
>> The thickness of the packaged wood board is 3CM (other factories are 1-2CM, which is not strong)
>> The wooden crate is at least 15 cm above the ground, which makes loading more convenient.

Shipping

>> By sea(mainly), by train, by air could be selected according to the characteristics of the product and the requirements of customers.

>> Mainly ship to Xingang in Tianjin(mainly), Dalian, Qingdao, Shanghai, Xiamen, Or Customized.

Freight

>> The shipping cost depends on the total weight and the cube of the product being shipped.
>> Different destinations have different transportation times. Please inform us in advance of urgently needed products.
>> Please send us your destination, we quote directly from the shipping company.

Maintenance of Marble Sculptures:

Marble religious sculptures should be cleaned regularly with a soft cloth and mild, pH‑neutral soap diluted in water. Avoid acidic or abrasive cleaners, wire brushes, or high‑pressure washing, as these can scratch or weaken the stone. For outdoor statues, gently remove dust, bird droppings, and pollution stains, and check periodically for cracks or loose parts so any damage can be repaired in time.

Maintenance of Bronze Sculptures:

Bronze sculptures naturally develop a patina over time, which can help protect the metal. To maintain their appearance, clean the surface gently with a soft cloth or brush and mild soap, then rinse and dry completely. For outdoor bronze statues, a thin coat of clear wax can be applied and lightly polished once or twice a year to protect against moisture and corrosion. Avoid harsh chemicals and abrasive tools that may damage the patina or surface details.

shipping

Available Global Shipping. Provide Door to Door Service.

CUSTOMIZED SERVICE

Get Custom Services with a Free Consultation.

BUYING GUIDE

Make Informed Choices with Our Comprehensive Buying Guide

Support

Need Help? Just Feel Free to Contact Us info@you-fine.com

Related Sculptures

church-bell-large-white-08
Large bronze swinging church bell with crucifix relief
Scroll to Top

Ask For A Quick Quote

We will contact you within 8 hours, please pay attention to the email box or whatsapp. 

about message6 We only use the information provided above to contact you in relation to your inquiry. For further details, read our Privacy Policy.