Custom Bronze Church Bell with Angel Reliefs

Custom cast bronze church bell with hand-carved angel reliefs, Latin inscriptions and warm brown patina. Made to order for parishes, cathedrals and monasteries. Sizes 5–2000 kg.
Item No: YRBR-007
Size: depends on diameter — 5 to 2000 kg
Material: High Quality Bronze
Price: $3,190-$6,590
Technique: Traditional lost wax method, Silica Sol Process, Patina

Advantage:  Factory Direct, Door to Door Delivery

Service:  Custom Design Avaiable.

Attention:  To protect our copyright, there are so many designs that we can not display on this website. Welcome to contact us for full catalogs.

Share:

Description

Angels have belonged on church bells for over a thousand years. The bell is the voice of the parish — it calls the faithful to Mass, marks the hours of the Angelus, and announces feast days and funerals. In Christian tradition, angels are the heavenly messengers who bring God’s word to earth, so placing them on the bell is a visual way of saying: this voice is not only metal and clapper; it is a message carried between heaven and the village below.

 

This custom church bell carries three hand-carved angel reliefs around its shoulder — each angel seated with folded wings, robes, and faces rendered in detail down to the last feather and fold of cloth.

The three angels on this bell also echo the threefold ringing of the Angelus — morning, noon, and evening — when Catholics recall the Annunciation.

What’s more, the bell follows a traditional profile: a narrow crown, a straight barrel flaring to a wide sound rim, and a thickened sound bow along the lower edge that gives the tone depth and sustain.

How We Cast It

We cast every bell by the lost-wax process. Our carvers build a pattern to your exact size and profile, then wrap it in a layered sand mould. The angel reliefs, foliate bands, and inscription lettering are all worked by hand into the clay model before pouring.

Each bell is cast as a single solid piece — no welded seams, no assembled sections. This one-piece construction is what gives the bell its deep, mellow, sustained tone; the bronze resonates as one continuous shell, so the sound carries clearly and long.

Thin relief features cool quickly during casting, so we pay close attention at that stage. Once the bell comes out of the mould, our artisans apply the patina by hand. After this step, the bell shows a warm brown surface with gentle light-to-shadow transitions.

We can also cast a non-ringing decorative version of this bell — same angel reliefs, same patina, but tuned as a wall display piece for shrines, lobbies or home chapels. Tell us which you need.

Where It Sings

This church bell is built for tower installation. It suits a parish church, cathedral, monastery or chapel. We also make smaller decorative wall-mounted bells for shrines and home chapels. The yoke — wooden or steel — is fabricated to match your bell’s size and your tower’s rigging.

Order this custom bronze church bell with angel reliefs — we will cast it to your size, inscription, and patina, and send you a sound recording before it ships.

 

Marble Carving Sculpture – Technique Process
1. Design & Planning

Based on religious themes or client requests, artists create sketches and drawings to define the pose, size, and details of the statue.

2. Selecting the Marble Block

High‑quality natural marble is chosen for its color, texture, and durability, ensuring it is suitable for indoor churches or outdoor use.

3. Rough Shaping

The marble block is cut to size and roughly shaped. Artisans remove excess stone with chisels and machines to form the basic outline.

4. Fine Carving

Using finer tools, sculptors carve facial expressions, hands, drapery, and religious symbols. This is the most skill‑intensive stage.

5. Smoothing & Polishing

The surface is smoothed with abrasives and polished to reveal the natural luster of the marble and a refined finish.

6. Quality Check & Protection

Each statue is carefully inspected. If needed, small corrections are made, and a protective treatment can be applied, especially for outdoor sculptures.

Bronze Sculpture – Technique Process
1. Design & Clay Model

The process begins with drawings and then a clay or wax model of the statue. This model shows all the details and is approved before casting.

2. Mold Making

From the clay model, a mold (usually silicone and plaster or fiberglass) is created. This mold captures all the fine details of the original model.

3. Wax Casting

Molten wax is poured into the mold to create a hollow wax replica of the sculpture. Artists refine the wax surface and add or adjust details.

4. Ceramic Shell (Lost‑Wax Process)

The wax sculpture is coated repeatedly with ceramic slurry and sand to build a hard shell. After drying, the wax is melted and drained out, leaving a hollow ceramic mold.

5. Bronze Pouring

Molten bronze is poured into the ceramic shell. Once the metal cools, the ceramic shell is broken away, revealing the raw bronze sculpture.

6. Welding & Chasing

If the sculpture is cast in several pieces, they are welded together. Artisans then grind, refine, and sharpen the details (a process called chasing).

7. Patina & Surface Treatment

Chemical patinas and heat are used to achieve the desired bronze color and tone. A protective wax or clear coating is applied to improve durability, especially outdoors.

8. Final Inspection

The finished bronze sculpture is inspected, cleaned, and prepared for packing and shipping to the client.

Packaging

>> The packaging is all made of a strong wood crate plus soft fixed.
>> The thickness of the packaged wood board is 3CM (other factories are 1-2CM, which is not strong)
>> The wooden crate is at least 15 cm above the ground, which makes loading more convenient.

Shipping

>> By sea(mainly), by train, by air could be selected according to the characteristics of the product and the requirements of customers.

>> Mainly ship to Xingang in Tianjin(mainly), Dalian, Qingdao, Shanghai, Xiamen, Or Customized.

Freight

>> The shipping cost depends on the total weight and the cube of the product being shipped.
>> Different destinations have different transportation times. Please inform us in advance of urgently needed products.
>> Please send us your destination, we quote directly from the shipping company.

Maintenance of Marble Sculptures:

Marble religious sculptures should be cleaned regularly with a soft cloth and mild, pH‑neutral soap diluted in water. Avoid acidic or abrasive cleaners, wire brushes, or high‑pressure washing, as these can scratch or weaken the stone. For outdoor statues, gently remove dust, bird droppings, and pollution stains, and check periodically for cracks or loose parts so any damage can be repaired in time.

Maintenance of Bronze Sculptures:

Bronze sculptures naturally develop a patina over time, which can help protect the metal. To maintain their appearance, clean the surface gently with a soft cloth or brush and mild soap, then rinse and dry completely. For outdoor bronze statues, a thin coat of clear wax can be applied and lightly polished once or twice a year to protect against moisture and corrosion. Avoid harsh chemicals and abrasive tools that may damage the patina or surface details.

shipping

Available Global Shipping. Provide Door to Door Service.

CUSTOMIZED SERVICE

Get Custom Services with a Free Consultation.

BUYING GUIDE

Make Informed Choices with Our Comprehensive Buying Guide

Support

Need Help? Just Feel Free to Contact Us info@you-fine.com

Related Sculptures

church-bell-white-07
Large bronze swinging church bell with crucifix relief
Scroll to Top

Ask For A Quick Quote

We will contact you within 8 hours, please pay attention to the email box or whatsapp. 

about message6 We only use the information provided above to contact you in relation to your inquiry. For further details, read our Privacy Policy.